Free Shipping on Orders Over $100

In the box: 

- Battery tattoo pen (2 battery packs)

- RCA adaptor 

- USB-C Cable

- RCA Cord

- Tool kit



OLED HD color display | Brushless motor | 4.0mm stroke | Multi Protect Safety Program | Battery 1800mAH

 

Operation:

1、After power on, the screen will display the following information:On/Off status,Jumpstart Volt icon, Battery, Memory Volt, Voltage, Current, Frequency, Timer.
2、Power On: Press and hold the power button for 2 seconds to turn on the device. The screen will display the previous voltage and enter standby mode. Press the power button to start/pause operation.

3、JumpStart Mode:Fast Double-click the power button to enter JumpStart mode. The screen will display a
lightning symbol. JumpStart Mode output will be at 9V for 0.3 seconds before returning to the current voltage.

4、Voltage Adjustment:The voltage can be adjusted 4-12V. Press the +/- buttons to increase or decrease the voltage by 0.1V. Long-pressing the button will rapidly increase or decrease the voltage.
5、Memory Voltages:You can preset 3 memory voltages M1/M2/M3.Long-press the Power button to switch between memories When output is activated. Click +/- buttons can adjustment the memory voltages and it will be auto-saved after adjustment.
6、Timer:The timer will only reset after shutting down by long-pressing the power button, and the device will enter sleep mode and screen-off after 3 minutes of no output, and the timer will pause. Press any button to wake up the screen, and then press the power button again to start work and continue the timer. The timer will not reset during plugging and unplugging the cord when is charging.
7、Brightness: If no buttons are operated for more than 10 seconds during power operation, the screen brightness will automatically decrease by 50%. Press any button to restore the normal brightness of the screen.
8、Power Off:Press and hold the power button for 2 seconds to manually power off the device. There is no output for 5 minutes the device will automatically power off.
9、Settings:After power on, simultaneously press the plus and minus buttons to enter the settings menu,Voltage color, Screen orientation, and exit options.
1)Volt Color:Click the +/- button to switch to the color option, click the power button to select the color, there is eight color modes are available, after the color is selected, press the +/- button to switch to Exit to exit the Settings.
2)Screen orientation: Click the +/- button to switch to the Display option, click the power button to select Horizontal screen H/ Vertical screen V, and press the +/- button to switch to Exit to exit the Settings.

Safety Protection

1、Output short circuit and overcurrent protection.
2、Input dual protection, the batteries come with overcharge and over discharge protection, Electric board set up short circuit、 overcurrent、overcharge protection.

 

Write a review

Note: HTML is not translated!
    Bad           Good

MARS Smart Wireless Battery Tattoo Pen Machine Kit

  • Product Code: TM2316
  • Availability: In Stock
  • $188.00


Available Options


-----------------------------------------------

Any questions please send an Email. You can also call us or send WhatsApp messages